Engineering and Technology
OPEN ACCESS
Influence Of Basalt Fibers On The Strength Of Heavyweight Concrete
DOI
Crossref DOI
10.37547/tajet/Volume08Issue01-14
tajet
2026
VOL. 8
/ NO. 01
JANUARY
RESEARCH OVERVIEW
Abstract
The use of basalt fibers in concrete should be expected to increase its resistance to short-term loads. However, this assumption is not supported by the results of large-scale experimental and theoretical studies. We believe the answer to this question can be found by analyzing the fundamentals of basalt fiber-reinforced concrete strength. This article focuses on the impact of randomly distributed basalt fibers and concrete composition on its strength properties. Results on this issue were obtained by determining the optimal composition and studying its strength.
RESEARCH TOPICS
Keywords
Basalt fiber-reinforced concrete
strength
composition
Downloads
Download data is not yet available.
SOURCES & SCHOLARSHIP
References
- Berg O.Ya. Physical foundations of concrete and reinforced concrete strength theory. M., State Construction Publishing House, 1962, 95 p.
- Akramov Kh.A., Yusupov R.R., Ergashov J.D. "Crack formation and destruction of basalt fiber concrete under short-term compressive load," "UNIVERSUM: TECHNICAL SCIENCES," No5 (134), M., 2025, pp. 28-34.
- TKP EN 1992-1-1-2009. Designing reinforced concrete structures. Eurocode 2, part 1-1. General rules and regulations for buildings. Minsk, 2010.
- Yusupov R.R., Khujaev D.Kh. "Connection of Reinforcement with Basalt Fiber Concrete." Problems of architecture and construction. SAMDAKU. Scientific and Technical Journal. No2, 2025, pp. 113-117.
- GOST 24452-2023. Methods for determining the prismatic strength, elastic modulus, and Poisson's ratio. M., 2024.
- Ergashov J.D. "Technology of basalt fiber-reinforced concrete based on local raw materials and its strength features," "JIZPI XABARNOMASI," scientific and technical journal, No2, 2025, pp. 281-289.
- Stepanova V.F., Buchkin A.V., Ilyin D.A. "Study of the features of the operation of concrete structures with combined reinforcement (composite polymer reinforcement and non-metallic fiber)." Construction Sciences, No1, 2017, pp. 124-128.