Volume 2.
Issue 08.

Based on archeological data, the author offeresin the paper a typological description of the cult
(temple) architecture in the Fergana Valley. For the first time, thedata on temples and shrines of
ancient and early medieval periods were collected and generalized

This article analyzes the dynamics of the housing stock growth in the republic, as well as issues related
to their maintenance, repair and management system. Practical suggestions and recommendations
for improving the management system and increasing the efficiency of using the housing stock are
given.

Effective use of GIS to solve various spatially localized problems requires the user to have sufficient
knowledge about geodetic coordinate systems, cartographic projections and other elements of the
mathematical basis of GIS maps, knowledge about methods of obtaining various information from the
map, mathematical and other methods of using this information to solve spatially localized GIS
problems.

The architecture of Uzbekistan has a very ancient history. The issues of formation of historical cities
of Uzbekistan, the stages of formation of urban planning structures from antiquity to the second half
of the XIX century are studied.
Today in the world under the concept of "sustainable development" can be observed a creative
trend aimed at combining social, economic and environmental balance.

Pre-cooling is an important part of the post-harvest cold chain logistics of litchi. Spray pre-cooling can
quickly reduce the temperature of litchi. Mastering the best process parameters of spray pre-cooling
can improve the pre-cooling efficiency. Taking the "Huaizhi" litchi as the research object, the
orthogonal experiment was carried out by selecting factors such as spray temperature, spray flow,
and litchi layer number, and the optimal process parameters of litchi spray precooling were obtained
through range analysis and variance analysis. The results show that when the spray temperature is 5℃,
the spray flow rate is 5 L/(s•m2
), and the number of litchi layers is 3, the 7/8 litchi pre-cooling time is
shorter, the pre-cooling uniformity σ is small, and the pre-cooling Best results.

This work considers continuous-discrete frameworks with a few quantizers (keys), closing
synchronously, but with diverse quantization periods, which are troublesome to analyze. Clearly, at
the same time, all those inadequacies of the portrayal of the energetic characteristics of frameworks
based on the z-transformation stay, which were pointed out in which they decide the thought of the
specified lesson of frameworks from more common positions

This paper presents the first-generation of design of two classes of software programs with artificial
intelligence. The robots created with intellect* will help people in different fields of the life and they
work for people.
Intellect – the thinking ability of a person.

The article presents and discusses the results of determining the diameter of the sampling drum on
the basis of theoretical research and substantiating the rational parameters of the system for hanging
the fibers of the discrete drum headset in the sampling zone of the pneumatic mechanical spinning
machine. The forces of interaction between the garniture teeth and the fibers were studied, and the
effect of the sampling process on the productivity and quality parameters of the fibers was analyzed.
Based on the research, graphical connections were obtained, these graphs were analyzed, and optimal
parameters were determined. The results of theoretical studies on the determination of the diameter
of sampled drum and justify the rational parameters of the system.

The paper theoretically explores the work of a fluctuating potato harvester grate to separate the soil
from the potato tubers using vertical oscillations in the separation of potato tubers. A link has been
established between the flying phase and the tuber rip phase of the potatoes for the planes, which
are horizontal with vertical oscillations and inclined with fluctuations at a certain angle. The altitude
of the particles and the rate of the impact thereof with the oscillating plane are considered, which
made it possible to determine the optimal parameters and kinematic modes of the separating
working organs of the potato combine combine.

The article discusses the influence of the finishing process on the physical and mechanical properties
of twisted yarn. The results of applied studies were analysed, and the resulting samples were analysed
by constructing correlation coefficients of variation by strength and tensile strength. Based on the
analysis, optimal options are proposed.

At present, the optimization of energy-saving technologies in mechanical engineering for production
of rolled sheets with different configurations by modern simulation methods is becoming an
important direction of informatization of engineering production. At the same time, in the active
zone, the process of asymmetric cold rolling of metal sheets is accompanied by an inhomogeneous
stress-deformed state. In non-canonical regions of deformations, an approach for determining the
optimal technological parameters and studying the stress-deformed state of the cold rolling process
by an asymmetric technology in the active zone of elastic-plastic deformations on the basis of
simulation modeling with the applied software package LS-DYNA by LS-PrePost (R) of V4.6.1 version
has been proposed in this paper.

This article gives a brief outline of versatile apps outlined for doctors and restorative understudies. It
records a number of applications, counting the English-language application “A to Z Anatomy”. The
article presents the different capacities, focal points of this versatile application and a brief direct to
working with it.

In the spinning process, spinning machines have improved the stretching tool, reducing their
unevenness by straightening and parallelism of fiber ends, reducing the number of yarn breaks in the
production of quality textile and knitted fabrics, a sharp increase in labor productivity, reducing
production costs, other economic indicators.

The forecast of the final petroleum effect of stratums of deposits, being - entered into the
development is too complicated. On tile base of multifactor of 27 petroleum and 15 under gas deposits,
related to carbonate collections regression equations were derived. Models described by these
equations are actual for the deposits with similar geological, physical, and techno¬logical parameters.
Usage of these models allows us to make a prognosis of the final petroleum effect of deposits, being
introduced into the development.

This article discusses the types, purpose, shape and structure of clothing, hygienic properties,
hygroscopicity, air permeability of the fabric, the dependence of air permeability on wind speed;
clothing consists of several layers, the results of observing the average seasonal changes listed. The
thickness of the garments of other thicknesses was described in detail