The Effect of The Grate Bar Angle of a Pneumo-Mechanical Cleaner on Impact Force Reduction and Lint Self-Discharge
J.E. Rakhmankulov , Associate Professor, TerGITU, Doctor of Philosophy, Uzbekistan B.E. Karshiyev , Associate Professor, TerGITU, Doctor of Philosophy, Uzbekistan O.A. Gulboev , Independent Researcher, TerGITU, Uzbekistan N.Kh. Mamatalieva , 1st-Year Master's Student, TerGITU, UzbekistanAbstract
The article presents the results of theoretical studies on selecting the optimal angle of inclination of the grate to the cleaned lint flow, which creates conditions for the unimpeded flow of material along its surface into the working zone of the saw cylinder of the developed pneumomechanical cleaner.
Keywords
lint, transportation, equation
References
R.R. Nazirov, J.E. Raxmankulov, R.E. Raxmankulov, O.A. Gulboyev. Substantiation of Research Directions for the Development of an Aeromechanical Cotton Lint Cleaner. Scientific Journal of Mechanics and Technology, Namangan Institute of Engineering and Construction, No. 1 (18), Vol. 6, Issue 1, 2025, pp. 266–270.
R.R. Nazirov, J.E. Raxmankulov, R.E. Raxmankulov, O.A. Gulboyev. Selection of the Scheme and Main Studied Parameters of an Efficient Cotton Lint Cleaning Device. Proceedings of the International Scientific and Technical Conference “The Role of Innovative Technologies in Light Industry, Food Industry and Agriculture within the Framework of Sustainable Development”, April 10–11, 2025, pp. 172–174.
Passport of the Saw Linter 5LP. Tashkent, TGSKB for Cotton Processing, 1981.
Dyachkov V.V., Fadin A.A., Bakiev R.A. Development of a Modernized Saw Linter with Elements of Automatic Control of Its Operation. Report of TsNIIKhprom, Tashkent, 1990, 211 p.
Jumaniyazov Q.J., Raxmonkulov R.E., Raxmankulov J.E., Gulboev O.A. Development of Science, 2025, Issue 8, Volume 2. Available at: https://devos.uz/article.php?id=1597
Jumaniyazov Q.J., Raxmonkulov R.E., Raxmankulov J.E., Urazov M.Q., Gulboev O.A. American Journal of Multidisciplinary Bulletin, ISSN: 2996-511X (online), Impact Factor: 9.512, Volume 3, Issue 1, 2025, published: January 30, 2025. DOI: https://doi.org/10.5281/zenodo.147404634
Nazirov R.R., Raxmankulov J.E., Gulboev O.A., Raxmankulov R.E. Design of an Aeromechanical Cotton Lint Cleaner, Experimental Methods and Preliminary Results. Development of Science. Available at: https://devos.uz/article.php?id=2145
Sultonova F., Toshbekov O., Urozov M., Boymurova N., Mustanova Z., Boltaeva I. Enhancing and Evaluating the Characteristics of Specialized Workwear for Employees in the Electric Power Supply Sector. American Institute of Physics Conference Series, Vol. 3331, No. 1, 2025, p. 050006. Available at: https://pubs.aip.org/aip/acp/article-abstract/3331/1/050006/3370919/
Download and View Statistics
Copyright License
Copyright (c) 2026 J.E. Rakhmankulov, B.E. Karshiyev, O.A. Gulboev, N.Kh. Mamatalieva

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.


Engineering and Technology
| Open Access |
DOI: