Results Of Studying The Operational Process To Improve The Existing Aspiration System
Usanov Abdulkhakim , Termez State University of Engineering and Agrotechnologies, Termez, Uzbekistan Raxmatjon Nazirov , Fiber Crops Research Institute. Tashkent, UzbekistanAbstract
The article presents the results of a study conducted to substantiate the directions for improving the existing aspiration system of the UHK aggregate used for cleaning raw cotton at the "Angor" cotton processing enterprise in Surkhandarya region. The study examines the amount of fine impurities generated during the operation of the aspiration system, the fractional composition of the impurities, their transportation through aspiration pipelines, and the cleaning processes within the system.
Keywords
Cotton, section, cleaning
References
Usanov A. Research on the efficiency of cleaning dusty air from the aspiration system of the cleaning UHK, "Qishloq xo'jaligini mexanizatsiyalash: ilm va innovatsiya," 2024, 367 p.2. Handbook on primary cotton processing. Tashkent -"Mehnat" -1994, 1995. Book I and II.
Handbook on primary cotton processing. Tashkent -"Mehnat" -1994, 1995. Book I and II.
Usanov A. Results of preliminary research on improving the aspiration system of the UXK cotton cleaning unit, "Problems and solutions of cargo and passenger transportation in the south of the republic," 2024, 685 p.
Khojiev M.Kh. Justification of diffuser parameters for an out-of-section pneumatic transport unit. //Cotton Industry. Tashkent. 1991. No5. pp. 11-13.
Usanov A., Shomirzayev E. "Methods for increasing the efficiency of cleaning dusty air from the aspiration system of the UHK cleaning unit" E3S Web of Conferences - 2024.
M.P. Kalinushkin. Pumps and Ventilators.-M.Higher School. 1987.
Download and View Statistics
Copyright License
Copyright (c) 2026 Usanov Abdulkhakim, Raxmatjon Nazirov

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.


Engineering and Technology
| Open Access |
DOI: