★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★Open research. Global perspectives.
editor@theamericanjournals.comPublisher Home ↗
Engineering and Technology OPEN ACCESS

Justification Of The Angle Of Installation Of The Upper Edge Of The Dump To The Direction Of Movement And The Law Of Variation Of The Angles Of The Horizontal Generatrices Of The Dump To The Direction Of Movement

F. Kh. Bakhramov
Doctor Of Philosophy Technics, Termez Branch Of The Tashkent State Technical University Named After Islam Karimov, Uzbekistan
DOI Crossref DOI 10.37547/tajet/Volume03Issue05-13
tajet 2021
VOL. 3 / NO. 05 MAY
FULL TEXT PP. 92-99
DOWNLOAD PDF

View all articles in this issue ↗

VOLUME 3
ISSUE 05
YEAR 2021
PAGES 92-99
RESEARCH OVERVIEW

Abstract

The wing mounting angles are the angles of its installation to the bottom of the furrow ε_КР and to the direction of motion  in the plane touching the ploughshare-moldboard surface in the area of the upper edge of the wing. To reduce the traction resistance of the canal digger, when choosing the installation angles of the wing, one should proceed from the condition of reducing the angle of capture of the seam by the moldboard . It is known from the theory of the share-moldboard surface that the angle   has a very significant effect on the traction resistance of the tool.

 

RESEARCH TOPICS

Keywords

Canal digger formation jamming dump

Downloads

Download data is not yet available.
SOURCES & SCHOLARSHIP

References

  1. Bakhramov F.Kh, Kurbanov A.T and other. Theoretical prerequisites for determining the rational parameters of temporary irrigators. Journal of Critical Reviews. ISSN 2394-5125. Vol 7, ISSUE 13.2020. [in English]
  2. Bakhramov F.Kh., Karshiev F. U., Sheraliev M. Theoretical Substantiation of the Basic Parameters of a Channel Digger. ISSN:2350-0328. International Journal of Advanced Research in Science, Engineeerring and Technology. Vol. 7, Issue 6, June 2020. [in English]
  3. Gallyamov R.M. Influence of displacement of the plow body PYa-3-35 on the quality of plowing // Mechanization and electrification of socialist agriculture. 1978. No. 2.-С.11-13. [in Russian]
  4. Imandosov A.T. Substantiation of the parameters and layout of the body of a two-tier plow for work at high speeds in the cotton growing area. Diss. Candidate of Engineering Sciences, Yangiyul. 1991.-p. 130. [in Russian]
  5. Listopad GE, Sharshak VK, Solodoboev VV Reclamation machines, tools for the temporary irrigation network. Moscow: Agropromizdat, 1986.-126 p. [in Russian]
  6. Manabaev N., Bakhramov F. The choice of the transverse profile of a temporary sprinkler.- book: Mechanization of labor-intensive production processes in the cotton growing zone. Materials of the scientific and practical conference. UzNIIME, UzASKhN. Tashkent, 1992.-P.15-16. [in Russian]
  7. Bakhramov F. Kh. Substantiation of the parameters of the working body of the canal digger for cutting temporary sprinklers. Abstract dissertation. Candidate of Engineering Sciences. Yangiyul. 1995.-115 p. [in Russian]
  8. Khasanov S.M. Substantiation of the optimal parameters of canal diggers. Questions of agricultural mechanics. T-X IU.-Minsk. Harvest. 1964.- S. 5-28. [in Russian]
  9. Osadchy A.P. Research of soil crumbling processes without seam turnover. Abstract of the dissertation for the degree of Doctor of Science. Tech. Science. - Bolgograd. 1972.-39 p. [in Russian]
  10. Dospekhov B.A. Field experiment technique. -Moscow. Kolos. 1979.-416 s.
  11. GOST 20915-75. Agricultural machinery. Methods for determining test conditions.-Moscow. From standards. 1975.-34 p. [in Russian]
  12. Bakhramov F.Kh. Substantiate the shape of the working body of the canal opener. Collection of materials of the Republican scientific-technical conference "Perspectives of development of transport and road complex in the southern republics". Termiz. Surxon-Nashr. 2017. -s 28-29. [in Uzbek]