Engineering and Technology
OPEN ACCESS
Development Of Aluminum Liquefaction Technology
DOI
Crossref DOI
10.37547/tajet/Volume03Issue04-03
tajet
2021
VOL. 3
/ NO. 04
APRIL
RESEARCH OVERVIEW
Abstract
This paper examines the effect of hydrogen gas on the quality of the casting during the liquefaction of aluminum alloy. In addition, the technology for the separation of aluminum from Al2O3 oxide, depending on the liquefaction temperature during the liquefaction of aluminum alloy.
RESEARCH TOPICS
Keywords
Aluminum
chemical element
constitute
Downloads
Download data is not yet available.
SOURCES & SCHOLARSHIP
References
- Turakhodjaev N. D. et al. ANALYSIS OF DEFECTS IN WHITE CAST IRON //Theoretical & Applied Science. – 2020. – №. 6. – С. 675-682.
- Turakhodjaev N. et al. EFFECT OF METAL CRYSTALLATION PERIOD ON PRODUCT QUALITY //Theoretical & Applied Science. – 2020. – №. 11. – С. 23-31.
- a. Djahongirovich T. N., Muysinaliyevich S. N. Important features of casting systems when casting alloy cast irons in sand-clay molds //ACADEMICIA: An International Multidisciplinary Research Journal. – 2020. – Т. 10. – №. 5. – С. 1573-1580.
- Turakhodjaev, N., Turakhujaeva, S., Turakhodjaev, S., Tursunbaev, S., Turakhodjaeva, F., & Turakhujaeva, A. (2020). Research On Heat Exchange In Melting Process. Solid State Technology, 63(6), 6653-6661.
- Wang, Y., Liao, Y., Wu, R., Turakhodjaev, N., Chen, H., Zhang, J., ... & Mardonakulov, S. (2020). Microstructure and mechanical properties of ultra-lightweight Mg-Li-Al/Al-Li composite produced by accumulative roll bonding at ambient temperature. Materials Science and Engineering: A, 787, 139494.
- TURAKHODJAEV, N., TURSUNBAEV, S., UMAROVA, D., KUCHKOROVA, M., & BAYDULLAEV, A. Influence of Alloying Conditions on the Properties of White Cast Iron. International Journal of Innovations in Engineering Research and Technology, 7(12), 1-6.
- Nodir, T., Sherzod, T., Ruslan, Z., Sarvar, T., & Azamat, B. (2020). STUDYING THE SCIENTIFIC AND TECHNOLOGICAL BASES FOR THE PROCESSING OF DUMPING COPPER AND ALUMINUM SLAGS. Journal of Critical Reviews, 7(11), 441-444.
- Турсунбаев, С. А., Зокиров, Р. С., & Тураев, Х. У. (2017). Влияние обработки деталей из алюминиевого сплава с применением высокоскоростных токарных станков на срок службы резца. In ТЕХНИКА И ТЕХНОЛОГИИ МАШИНОСТРОЕНИЯ (pp. 159-163).
- Wang, Y., Zhong, F., Wu, R., Wu, H., Turakhodjaev, N., Kudratkhon, B., ... & Zhang, M. (2020). High-strength, ductility and modulus Al–Li/B4C composite with near nanostructure produced by accumulative roll bonding. Journal of Alloys and Compounds, 834, 155105.