Engineering and Technology
| Open Access |
DOI: Comparative Structural Analysis of ECM and BCM Architectures in Chevrolet Tracker and Chevrolet Onix Based on Pin-Level Functional Investigation
Arkadiy Yusman , Master’s Degree Student Turin Polytechnic University In Tashkent UzbekistanAbstract
Modern passenger vehicles rely on distributed electronic control architectures in which the Engine Control Module (ECM) and Body Control Module (BCM) play central roles in powertrain management, ignition authorization, and body-function coordination. Understanding the internal electrical organization of these modules is essential for diagnostic engineering, electronic system integration, and development of auxiliary vehicle-control solutions.
This study presents a comparative structural analysis of ECM and BCM systems implemented in Chevrolet Tracker and Chevrolet Onix vehicles equipped with the common 1.2 L turbocharged engine platform. The research was conducted through detailed connector-level and pin-level investigation of ECM connector groups X1 and X2 and BCM connector groups X1–X8. Particular attention was given to ignition-related signals, communication pathways, relay-control circuits, and body-condition monitoring functions relevant to engine-start authorization.
The results demonstrate a high degree of architectural similarity between both vehicle platforms, confirming the use of a unified General Motors electronic framework. At the same time, several model-specific differences were identified, including clutch-position sensing, brake-signal architecture, selective sensor-reference redistribution, and BCM adaptation associated with rear body-function implementation. These findings confirm the feasibility of developing unified auxiliary control solutions while accounting for limited model-dependent electrical variations.
Keywords
ECM, BCM, Chevrolet Tracker, Chevrolet Onix
References
Robert Bosch GmbH. CAN Specification Version 2.0. Stuttgart, Germany, 1991.
Wilfried Voss. A Comprehensible Guide to Controller Area Network. Copperhill Technologies Corporation, 2020.
SAE International. Remote Engine Start Systems for Road Vehicles. SAE Technical Standards, 2021.
Reif, K. Automotive Electronics Handbook. Springer Vieweg, 2018.
Denton, T. Advanced Automotive Fault Diagnosis. Routledge, 2018.
Download and View Statistics
Copyright License
Copyright (c) 2026 Arkadiy Yusman
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.