Strength Calculation Of Planetary Gear Of The Seed-Removing Pipe
DOI:
https://doi.org/10.37547/tajet/Volume07Issue03-19Abstract
In the article, a planetary gearbox is adopted to ensure the efficiency and compactness of the vas deferent drive. The number of teeth of the sun gear Z1=12, satellite Z2=12 and main gear Z3=36 with a module m=3 mm is checked for compliance with the condition of assembly and proximity to the number of satellites equal to K=4. Verification calculations of the sun gear teeth and the satellite axis for bending are carried out, in which the strength condition is met with a reserve of sF=24.93 MPa£[sF]= 465 MPa – 18.5 times and su=20.26 MPa£[su]= 60 MPa – 2.96 times. In addition, taking into account the strength calculations, the dimensional values of the planetary gearbox units of the vas deferent tube are determined.
Downloads
References
Planetarnye zubchatye peredachi. https://k-a-t.ru/detali_mashin/24-dm_zubchatye12/index.shtml
Razumov M.S., Gridin D.S., Vorob'jova E.S. Analiz konstrukcij planetarnogo reduktora s shevronnym zacepleniem // Sovremennye materialy, tehnika i tehnologii, №2(5), 2016 s. 160-165.
Razumov M.S., Gridin D.S., Dubovoj A.Ju. Povyshenie konstruktivnyh vozmozhnostej planetarnyh peredach / Sovremennye instrumental'nye materialy, informacionnye tehnologii i innovacii: Sb. nauch. trudov – Kursk, 2015. S. 362-366.
Nerazrushajushhij kontrol'. Spravochnik v 7 tomah pod redakciej chl.-korr. RAN V.V. Kljueva, t.7 – Moskva, 2005. – 828 s.
Gerike P.B. Nerazrushajushhij kontrol' drobil'no-sortirovochnogo oborudovanija na obogatitel'nyh fabrikah Kuzbassa /P. B. Gerike// Vestnik Nauchnogo centra po bezopasnosti rabot v ugol'noj promyshlennosti, №2. – Kemerovo. – 2019. S. 62-69
Puchalski A., Komorska I. Stable distributions and fractal diagnostic models of vibration signals of rotating systems. Applied Condition Monitoring. 2018, Vol. 9. Pp 91-101. https://doi.org/10.1007/978-3-319-61927-9_9
Gerike P.B., Nikitin A.G. Diagnostika planetarnyh reduktorov po parametram vibracii // nauchno-tehnicheskij zhurnal Vestnik. Tehnologicheskie voprosy bezopasnosti gornyh rabot. 2019, №4 – s. 55-61.
Pashkevich A.M. Metodika rascheta planetarnyh radial'no-plunzhernyh sharikovyh reduktorov // Vestnik Belorussko-Rossijskogo universiteta. 2014. № 1 (42)
Chernavskij S.A. Kursovoe proektirovanie detalej mashin: Ucheb. posobie dlja uchashhihsja K93 mashinostroitel'nyh special'nostej tehnikumov / S.A.Chernavskij, K. N. Bokov, I. M. Chernin i dr.— 2-e izd., pererab. i dop. — M.: Mashinostroenie, 1988. — 416 s.
Krasnen'kov V.I., Vashec A.D. Proektirovanie planetarnyh mehanizmov transportnyh mashin. M.: Mashinostroenie, 1986. - 272 s.
Haritonov S.A., Nagajcev M.V. Raschet i proektirovanieplanetarnyh korobok peredach. –M.: 2011. – 225 s.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 D.M. Mukhammadiev, I.O. Ergashev, L.Y. Zhamolova, M.S. Abdusalomov
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.