Applied Sciences
OPEN ACCESS
To Calculation Of Bended Elements Working Under The Conditions Of Exposure To High And High Temperatures On The Lateral Force By A New Method
DOI
Crossref DOI
10.37547/tajas/Volume03Issue05-33
tajas
2021
VOL. 3
/ NO. 5
MAY
RESEARCH OVERVIEW
Abstract
The article presents a new method for calculating bending reinforced concrete elements made of conventional and heat-resistant concrete operating under conditions of high and high technological temperatures on the action of transverse forces. The advantage of the proposed calculation method over the method adopted in the current design standards based on a comparison of the calculation results of the experimental data is shown.
RESEARCH TOPICS
Keywords
Ordinary heavy concrete, heat-resistant concrete
reinforcement
, bending element
Downloads
Download data is not yet available.
SOURCES & SCHOLARSHIP
References
- Makhkamov Y.M. Resistance of bending reinforced concrete elements under the action of shear forces and high temperatures. Diss…. Ph.D. M., 1984, -253 s
- Makhkamov YM, Mirzababayeva SM BENDING OF BENDED REINFORCED CONCRETE ELEMENTS UNDER THE ACTION OF TRANSVERSAL FORCES AND TECHNOLOGICAL TEMPERATURES // Problems of modern science and education. - 2019. - No. 12-2 (145).
- Makhkamov YM, Mirzababayeva SM Temperature deflections of reinforced concrete beams under the influence of technological temperatures // Problems of modern science and education. - 2019. - No. 11-1 (144).
- Makhkamov Yu.M. A design model of the bending of reinforced concrete elements under the action of shear forces in conditions of high and high temperatures. American Engineering Journal. - 2020. - T. 2. - No. 10. - S. 17-24.
- Design Model Of Bending Reinforced Concrete Elements Under Action Of Transverse Forces Under Conditions Of Increased And High Temperatures
- YM Mahkamov - The American Journal of Engineering and Technology, 2020
- Y.M. Makhkamov, S.M. Mirzababaeva. Design model of bending reinforced concrete elements under the action of transverse forces under conditions of exposure to high and high temperatures. Scientific and technical journal FerPI. No. 3, 2019, p. 160.
- Goncharova N. I., Abоbakirova Z. A., Kimsanov Z. Technological Features of Magnetic Activation of Cement Paste" Advanced Research in Science //Engineering and Technology. – 2019. – Т. 6. – №. 5.
- Abdukhalimjohnovna M. U. Failure Mechanism Of Bending Reinforced Concrete Elements Under The Action Of Transverse Forces //The American Journal of Applied sciences. – 2020. – Т. 2. – №. 12. – С. 36-43.
- Milovanov A.F., Pryadko V.M. Calculation of bending reinforced concrete elements for shear force under high temperature conditions. –M .: Stroyizdat, 1965, - 135 p.
- Zatulovsky 3.D. Fire resistance of bent prestressed reinforced concrete elements under the action of transverse forces. - Dissertation ... candidate of technical sciences. - M., 1971, - 119 p.
- KMK 2.03.01-96. Concrete and reinforced concrete structures. -T., 1997, -215 p.
- KMK 2.03.04-98. Concrete and reinforced concrete structures designed to work in conditions of exposure to high and high temperatures. T., 1998, -115s.